Bike Stem Manufacturer & Supplier
Supplying ISO 4210-5 compliant bicycle stems engineered for Road, MTB, Gravel, and E-Bike applications. We deliver 3D-forged AL6061-T6 and CNC-machined AL7075-T6 stem assemblies, integrated cable routing (ICR) solutions, and certified dynamic fatigue testing for Tier-1 OEMs and aftermarket distributors.
Product Types & Categories
|
Category |
Typical Application |
Key Technical Features |
Steering & Clamp Compatibility |
|
MTB / Enduro / DH |
Trail, Enduro, Downhill |
Short length (35-50 mm), zero-rise, wide faceplate contact area for 35 mm handlebars |
Steerer: 28.6 mm (1-1/8"); Bar: 35.0 mm / 31.8 mm |
|
Performance Road |
Competitive Road, Crit Racing |
Negative angle (-6 deg to -17 deg), aerodynamic cross-section, titanium bolt options |
Steerer: 28.6 mm / 31.8 mm (1-1/4"); Bar: 31.8 mm |
|
Integrated Cable Routing (ICR) |
E-Bikes, Modern Road, Gravel |
Internal porting for hydraulic hoses and electronic shifting wires, custom headset spacers |
Steerer: 28.6 mm / 31.8 mm; Bar: 31.8 mm |
|
Gravel & Adventure |
All-Road, Bikepacking |
Tuned flex zones for vibration damping, accessory mounts (GPS/Light integration) |
Steerer: 28.6 mm; Bar: 31.8 mm |
|
Urban & Adjustable |
Commuter, Trekking, E-Mobility |
0 deg to +60 deg angle adjustment, dual locking pinch bolts, cold-forged joint system |
Steerer: 28.6 mm / 25.4 mm; Bar: 25.4 mm / 31.8 mm |
Specifications & Options
Dimensional Envelope & Geometries
|
Parameter |
Available Specifications |
|
Stem Extension Length |
35, 40, 45, 50, 60, 70, 80, 90, 100, 110, 120 mm |
|
Stem Angle |
0°, ±6°, ±7°, ±12°, ±17°, ±25°, ±35° |
|
Steerer Clamp Diameter |
28.6 mm (1-1/8"); 31.8 mm (1-1/4"); 38.1 mm (1.5") |
|
Handlebar Clamp Diameter |
25.4, 31.8, 35.0 mm |
|
Stack Height |
38–42 mm |
Hardware & Grade Options
|
Hardware Type |
Material / Grade |
Surface Treatment / Features |
|
Steel Bolts |
Grade 8.8 / Grade 10.9 |
Dacromet or ED black anti-corrosion coating |
|
Stainless Steel Bolts |
SUS304 / SUS316 |
Corrosion-resistant hardware |
|
Titanium Bolts |
Ti-6Al-4V (Grade 5) |
Lightweight construction; rolled threads to help reduce galling |
Weight Targets
|
Stem Construction |
Material |
Target Weight |
|
Standard 3D Forged Stem |
AL6061-T6 |
125–145 g |
|
CNC Lightweight Stem |
AL7075-T6 |
105–120 g |
|
Carbon Fiber Stem Body |
Carbon Fiber Composite |
110–130 g |
Materials & Manufacturing
Cold / Hot 3D Forging: AL6061 or AL7075 aluminum billets undergo multi-stage hydraulic press forging. This aligns the internal metal grain structure along load paths, increasing fatigue limit by up to 35% compared to cast components.
Precision CNC Machining: 4-axis and 5-axis CNC centers mill clamp bores, faceplates, and reduction pockets. Steerer tube and handlebar clamp roundness tolerances are maintained within +/-0.03 mm to prevent stress concentrations on carbon steerer tubes or handlebars.
Chamfering & De-Burring: Automated tumble finishing and manual edge chamfering remove sharp internal borders—specifically on ICR cable entry/exit ports—preventing cut damage to internal hydraulic lines or wiring harnesses.
Surface Treatment & Anodizing: Type II sulfuric acid anodizing (black, silver, custom blast finishes) providing a minimum coating thickness of 12-15 microns. Pass 96-hour neutral salt spray testing (ASTM B117) without pitting.

Custom Geometry & Structural Simulation: Finite Element Analysis (FEA) to optimize weight while maintaining torsional stiffness under sprinting forces.
Rapid Prototyping: SLA 3D plastic prints within 48 hours for fitment checks; functional CNC aluminum prototypes within 7 - 10 days.
Tooling Development: In-house forging die production completed within 25 - 30 days.
Branding & Graphic Options:
Laser-etched alignment graphics and torque specification callouts (e.g., 5-6 N.m).
High-precision screen printing or decal under clear coat.
Custom faceplate geometry featuring proprietary customer logos.
Stage 1: Dynamic Out-of-Phase Fatigue Test: 100,000 cycles under +/-260 N opposing forces applied to handlebar ends.
Stage 2: Dynamic In-Phase Fatigue Test: 100,000 cycles under cyclic force up to 420 N applied simultaneously to both sides.
Stage 3: Static Strength Test: Vertical bending load up to 2,000 N applied to evaluate permanent deformation or yield failure.
Stage 4: Clamping Torque & Slip Test: Handlebar and steerer torque verification up to 1.5x recommended spec to check thread stripping and anti-slip performance.
CMM Dimensional Audit: Coordinate Measuring Machine checks for bore alignment, center-to-center length accuracy, and perpendicularity (within 0.05 mm limits).

MOQ, Lead Time & Packaging
|
Parameter |
Specifications |
||
|
MOQ – Standard Molds / Existing Anodized Colors |
500 pcs / size / color |
||
|
MOQ – Custom Anodizing Colors / Laser Graphics |
1,000 pcs / order |
||
|
MOQ – Custom Forging Tooling (ODM Project) |
2,000 pcs / year |
||
|
Prototype Sample Lead Time |
7–10 working days |
||
|
Mass Production Lead Time |
35–45 days after sample sign-off and deposit receipt |
||
|
OEM Assembly Line Pack |
Individual bubble sleeves; corrugated master cartons with grid dividers; 50 pcs / carton |
OEM production and bulk shipments |
|
|
Retail Packaging |
Custom display boxes or pegboard hang cards, barcode printing, screw protectors, and instruction manuals |
Retail distribution and branded products |
|

RFQ Call To Action
Request a Technical Quotation & Sample Kit
Need verified, fatigue-tested stems for your upcoming bike builds or aftermarket component line? Contact our engineering team for 2D/3D CAD files, test reports, or physical evaluation samples.
Email:info@rxlsl.com
Direct Line: +86-17352807667
Required for Quote: Intended application (MTB/Road/E-Bike), target clamp sizes, length/angle breakdown, estimated annual quantity, and CAD files (.STEP/.IGS) for custom designs.
We're well-known as one of the leading bike stem manufacturers and suppliers in China, also support customized service. Please feel free to buy high quality bike stem for sale here from our factory. For more information, contact us now.










