Road Bike Handlebar Manufacturer & Supplier

 

OEM and ODM road bike handlebars for bicycle brands, component distributors, and custom bicycle assembly programs. Available product configurations include compact road drop bars, aerodynamic integrated cable routing (ICR) handlebars, flared gravel handlebars, and one-piece carbon cockpits.
Material options include AL6061-T6 and AL7050-T73 aluminum alloys, along with Toray T700/T800 carbon fiber, subject to model availability. Custom geometry, surface finishes, branding, and packaging can be developed to meet your product specifications and target market requirements.

 
 

Product Types & Categories

 

Product Category

Typical Applications

Key Design Features

Geometry Options

Compact Performance Road Handlebar

Road racing, endurance, criterium

Compact drop profile and 31.8 mm round clamp zone

Reach: 70–75 mm; Drop: 120–125 mm

Aero Integrated Cable Routing Handlebar

Aero road bikes and performance road builds

Flattened top profile and internal routing provisions for compatible brake hoses and electronic wiring

Reach: 75–80 mm; Drop: 125–130 mm

Gravel & All-Road Flared Handlebar

Gravel racing, bikepacking, adventure cycling

Flared drops and geometry options for different hand positions and riding conditions

Reach: 65–75 mm; Drop: 105–115 mm; Flare: 6–16 deg

One-Piece Integrated Carbon Cockpit

Premium road and aerodynamic bicycle builds

Integrated handlebar and stem structure with model-specific cable routing

Reach: 75–85 mm; Drop: 125–130 mm; Stem length: 90–130 mm

 

Specifications & Options

 

Dimensional Geometry

Parameter

Available Specifications

Handlebar Width

360, 380, 400, 420, 440, 460 mm, measured center-to-center at the hoods where applicable

Reach

70, 75, 80, 85 mm

Drop

115, 120, 125, 130 mm

Flare Angle

0, 4, 6, 12, 16 deg

Standard Stem Clamp Diameter

31.8 mm

Other Clamp / Cockpit Options

35.0 mm or integrated bar-stem configurations, subject to model compatibility

Internal Cable Routing

Available on compatible ICR models; routing path and port layout depend on the handlebar design

 

Material Grades & Weight Targets

Material / Construction

Design Characteristics

Reference Weight

Double-Butted AL6061-T6 Alloy

Variable wall thickness; suitable for standard road and endurance configurations

280–310 g at 420 mm width

AL7050-T73 Alloy

Higher-strength alloy option for performance-oriented designs

230–250 g; confirm width and model

Toray T700/T800 Carbon Fiber

Carbon composite construction with model-specific fiber lay-up and reinforced clamping areas

175–205 g; confirm width and model

 

Carbon Bicycle Integrated Road Drop Bar

 

Materials & Manufacturing

Alloy 3D CNC Bending & Hydroforming: Seamless AL6061/7050 tubes undergo computer-controlled multi-axis CNC bending followed by high-pressure liquid hydroforming. This creates precise oval top sections and flare transitions without wall thinning or cross-sectional distortion.

 

Carbon Fiber EPS Mold Technology: Carbon fiber prepregs (Toray T700/T800) are laid up over Ethyl PolyStyrene (EPS) core bladders. During heat curing, internal pressure forces out excess resin and eliminates internal wrinkling, delivering clean, smooth inner walls that allow effortless internal cable installation.

 

Internal Cable Port De-Burring & Chamfering: All entry and exit ports for Integrated Cable Routing (ICR) receive automated CNC chamfering and manual internal inspection. This eliminates sharp composite or alloy edges that could chafe or slice hydraulic brake hoses and shifting wires.

 

Surface Finishing & Shot Peening: Alloy bars undergo shot peening to induce compressive surface stress and extend fatigue life before anodizing. Carbon models feature precision matte or gloss clear coats
with anti-slip friction grit applied to stem and lever clamping zones.

 

OEM / ODM & Customization

 

 

Customization Area

Available Project Options

Geometry Development

Width, reach, drop, flare, top profile, and compatible stem dimensions

Material Selection

AL6061-T6, AL7050-T73, and carbon fiber options, subject to model availability

Carbon Lay-Up

Project-specific fiber orientation and reinforcement design, subject to engineering review

Cable Routing

Internal routing ports and paths matched to the intended frame, fork, brake, and electronic shifting configuration

Tooling Development

Custom aluminum forming dies or carbon molds, subject to design review and tooling quotation

Prototype Development

Samples for dimensional review, fit checks, assembly trials, and agreed validation testing

Branding

Laser marking, decals, screen printing, and other supported graphic options

Surface Finish

Available anodized colors, matte or gloss finishes, and approved coating options

Packaging

Bulk OEM packaging or customized retail packaging

 

 

Quality Control & Testing

Every production batch undergoes structural and fatigue testing compliant with ISO 4210-5 handlebar safety requirements prior to warehouse release:

 

Stage 1: Out-of-Phase Dynamic Fatigue Test: 100,000 cycles under +/-270 N opposing forces applied to handlebar drop ends.

 

Stage 2: In-Phase Dynamic Fatigue Test: 100,000 cycles under 430 N cyclic force applied simultaneously to both sides of the drops.

 

Stage 3: Static Bending Strength Test: Vertical load up to 1,800 N applied to drop ends to measure permanent yield deformation and ultimate structural limit.

 

Stage 4: Lever Clamp Area Crush Resistance Test: Brake lever clamp torque applied at 1.5x maximum rating (up to 9 N.m) to verify zero composite crushing or structural cracking

 

Laser CMM Alignment & Wall Thickness Inspection: Ultrasonic wall-thickness gauges verify uniform material distribution along bends, while Laser CMM checks center-to-end symmetry within +/-0.5 mm tolerance limits.

Carbon Bicycle Integrated Road Drop Bar

 

MOQ, Lead Time & Packaging

 

Product / Order Type

Reference MOQ

Standard Aluminum Drop Handlebars

500 pcs per specification / color

Carbon Fiber Drop Handlebars with Existing Molds

200 pcs per specification

Custom Tooling / ODM Projects

1,000 pcs per year

Order Stage

Reference Lead Time

Evaluation Samples

7–12 working days

Mass Production

35–45 days after sample sign-off and deposit confirmation

Custom Tooling

Confirmed according to design complexity, tooling scope, and project schedule

Bulk OEM Assembly Pack

Individual protective foam sleeves; corrugated master cartons with dividers; reference packing quantity of 20–30 pcs per carton

OEM assembly lines and bulk shipments

Retail-Ready Packaging

Custom display boxes or header cards with barcode labels, product information, and compatible installation guidance

Branded retail distribution

 

FAQ

 

Q: How do you reduce the risk of internal cable routing damage?

A: Internal routing channels and entry or exit ports are designed for the intended brake hoses and electronic wiring. Port edges and internal surfaces should be inspected for burrs, sharp edges, and other defects that could interfere with installation. Routing compatibility should be verified with the intended frame and component configuration.

Q: How do you address cracking or damage around brake lever clamp areas?

A: Clamp-area design, local reinforcement, surface condition, and installation torque are reviewed according to the material and model. Carbon handlebars require particular attention to the manufacturer's specified clamp position and torque limits. Assembly instructions should be followed, and structural validation should be defined for the intended product.

Q: Can you control left-to-right handlebar symmetry?

A: Yes, subject to the agreed inspection plan. Critical dimensions such as overall width, reach, drop, flare, and center alignment can be checked against approved drawings. The required tolerances should be specified for each model rather than applying one universal tolerance to all handlebar designs.

Q: Can you customize flare, reach, and drop for gravel handlebars?

A: Custom geometry can be evaluated according to the intended riding application, rider fit requirements, cable routing, and tooling feasibility. Final dimensions and flare options are confirmed during drawing review and prototype approval.

Q: What quality tests are available for aluminum and carbon handlebars?

A: Potential validation activities include dimensional inspection, material verification, routing inspection, clamp-area checks, and applicable structural or fatigue testing. The available test methods, acceptance criteria, and report scope must be confirmed for the specific model and project.

Q: How do you protect custom designs and tooling for OEM / ODM projects?

A: Confidentiality, tooling ownership, storage, and permitted use should be defined in the project agreement and NDA. Customers should confirm these terms before tooling begins, including whether the tooling is dedicated to their project and how future maintenance or replacement will be handled.

 

modular-1
Request A Road Quotation

Send us your target geometry, material preference, cable routing requirements, estimated annual quantity, and branding or packaging needs to start a technical review.
For a faster quotation, please provide:
Handlebar type: Road, aero, gravel, or integrated cockpit.
Material: Aluminum alloy or carbon fiber.
Width, reach, drop, and flare.

Clamp dimensions and cable routing requirements.
Target weight and finish.
Estimated order quantity and annual demand.
CAD files or technical drawings, if available.
Contact: Email: info@rxlsl.com Direct Line: +86-17352807667

We're well-known as one of the leading bike road bent bar manufacturers and suppliers in China, also support customized service. Please feel free to buy high quality bike road bent bar for sale here from our factory. For more information, contact us now.

integrated aero cycling system, monocoque racing road cockpit handlebar, professional carbon integrated road system